Difference between revisions of "Reflow Soldering (Beta Layout kit)"
From Tech
Jump to navigationJump to search| Line 2: | Line 2: | ||
screen -L /dev/ttyUSB0 |
screen -L /dev/ttyUSB0 |
||
The '-L' argument saves the session to a logfile. |
The '-L' argument saves the session to a logfile. |
||
| + | |||
| − | If screen exits without error, you |
+ | If screen exits without error, check if you have read/write access to /dev/ttyUSB0. If not, run: |
| + | sudo adduser $USER dialout |
||
Settings for Pb soldering: |
Settings for Pb soldering: |
||
Latest revision as of 09:10, 28 August 2020
Connecting to the Beta Layout Flow controller simply with screen:
screen -L /dev/ttyUSB0
The '-L' argument saves the session to a logfile.
If screen exits without error, check if you have read/write access to /dev/ttyUSB0. If not, run:
sudo adduser $USER dialout
Settings for Pb soldering:
phttemp 125 Preheat temperature: [0..254] degC phttime 150 Preheat time: [0..65534] Sekunden phtpwr 60 Preheat power: [0..100] % soaktemp 180 Soak temperature: [0..254] degC soaktime 90 Soak time: [0..65534] Sekunden soakpwr 80 Soak power: [0..100] % reflowtemp 230 Reflow temperature: [0..254] degC reflowtime 140 Reflow time: [0..65534] Sekunden reflowpwr 100 Reflow power: [0..100] % dwelltemp 232 Dwell temperature: [0..254] degC dwelltime 40 Dwell time: [0..65534] Sekunden dwellpwr 80 Dwell power: [0..100] % tempoffset- 10 temperature adjust [-30..30] deg debug OFF output debug information [0 or 1] trace OFF output internal status information [0 or 1] settings 0 select the active parameter set [0..4]
Settings for Sn96.5Ag3Cu0.5 soldering
- Same, but reflowtemp=245;
Boards (tested with PCBway boards) do start to smell, and the areas without copper turn darker (not black yet)
