Difference between revisions of "FPGA Test Board"
From Tech
Jump to navigationJump to search| Line 1: | Line 1: | ||
=Components= |
=Components= |
||
| − | * vq100, FPBG (1mm) footprints |
+ | * FPGA: vq100, FPBG (1mm) footprints |
| + | ** [http://www.xilinx.com/support/documentation/data_sheets/ds312.pdf XC3S100E-4VQG100C], [http://www.digikey.com/product-detail/en/XC3S100E-4VQG100C/122-1479-ND/1091707 digikey 122-1479-ND] |
||
| + | ** [http://www.xilinx.com/support/documentation/data_sheets/ds312.pdf XC3S500E-4FTG256C], [http://www.digikey.com/product-detail/en/XC3S500E-4FTG256C/122-1485-ND/1091713 digikey 122-1485-ND] |
||
* DisplayPort connector footprints |
* DisplayPort connector footprints |
||
* A/D converter, for instance |
* A/D converter, for instance |
||
Revision as of 21:55, 20 April 2013
Components
- FPGA: vq100, FPBG (1mm) footprints
- DisplayPort connector footprints
- A/D converter, for instance
- 1000BaseT ethernet chip + connector
- 16 pin header
- ?? 96-pin harting connector?
- 25MHz/50MHz clock for instance
- LDO's(1.2V, 2.5, 3.3?),
- FTDI2232, FTDI - FT2232D/TR - USB-UART Farnell 1615843, EUR 8.44
Todo/tocheck
- make papilio output +/- 71MHz differential signal, at several differential voltages.
- add footprints to eagle
- can spartan-differential easily be made compatible with rs484?
Other Documents
