Difference between revisions of "Reflow Soldering (Beta Layout kit)"
From Tech
Jump to navigationJump to search (Created page with "Connecting to the Beta Layout Flow controller simply with screen: screen -L /dev/ttyUSB0 The '-L' argument saves the session to a logfile. Settings for Pb soldering: phttem...") |
|||
| Line 24: | Line 24: | ||
Settings for Sn96.5Ag3Cu0.5 soldering |
Settings for Sn96.5Ag3Cu0.5 soldering |
||
* Same, but reflowtemp=245; |
* Same, but reflowtemp=245; |
||
| + | Boards (tested with PCBway boards) do start to smell, and the areas without copper turn darker (not black yet) |
||
Revision as of 16:30, 22 August 2020
Connecting to the Beta Layout Flow controller simply with screen:
screen -L /dev/ttyUSB0
The '-L' argument saves the session to a logfile.
Settings for Pb soldering:
phttemp 125 Preheat temperature: [0..254] degC phttime 150 Preheat time: [0..65534] Sekunden phtpwr 60 Preheat power: [0..100] % soaktemp 180 Soak temperature: [0..254] degC soaktime 90 Soak time: [0..65534] Sekunden soakpwr 80 Soak power: [0..100] % reflowtemp 230 Reflow temperature: [0..254] degC reflowtime 140 Reflow time: [0..65534] Sekunden reflowpwr 100 Reflow power: [0..100] % dwelltemp 232 Dwell temperature: [0..254] degC dwelltime 40 Dwell time: [0..65534] Sekunden dwellpwr 80 Dwell power: [0..100] % tempoffset- 10 temperature adjust [-30..30] deg debug OFF output debug information [0 or 1] trace OFF output internal status information [0 or 1] settings 0 select the active parameter set [0..4]
Settings for Sn96.5Ag3Cu0.5 soldering
- Same, but reflowtemp=245;
Boards (tested with PCBway boards) do start to smell, and the areas without copper turn darker (not black yet)
