Power Converters

Main MOSFETs

P channel

• FDS9953A, digi-key FDS9953ACT-ND, max 2.9 A cont, typ 2.5/max 3.4 nC, <23 ns on/off time (fairchild package drawing)

N Channnel

• SSM6N58NU, digi-key SSM6N58NULFCT-ND, max 4A continuous, 1.8nC gate charge, 29/9 ns on/off time, dual, EUR 0.34 (25 stuks)

Drive of main mosfets

Comparators

• MAX9012EUA+ digi-key MAX9012EUA+-ND: typ 20/30 mA short, prop delay 9ns, rise/fall 3 ns, 2.2 EUR (dual)
• 584-AD8564ARUZ-R, mouse, short current??? in tabel niet meer dan +/- 10 mA, in text 'can deliver up to 40 mA per channel'. Rest wel goed (en quad).
• LMV7219M7, Farnell 1468946: typ 65 mA short, rise/fall time 1.3ns, prop delay typ 7, max 19 ns, EUR 2.96/stuk (1.6 voor 50)
• NCX2200, farnell 2164804: typ 68 mA short, 10 ns transition time, ... 800ns prop delay...

MOSFETs

• N/P: DMG1029SV, digi-key, mouser: typ 0.3 nC, 15 ns, 6 Ohm, EUR 0.43
• N/P: DMC2400UV-7, digikey, 0.5 nC, Vgs(th)=0.9V, 0.48 Ohm (Vgs=4.5V), EUR 0.25, SOT563
• N/P: DMG1016UDW-7, digikey, typ 0.74 nC (740nC datasheet), Vgs(th)=1V , RdsON=0.5 Ohm (Vgs=4.5V), SOT363 (pitch 0.65)

Other Components

• -5V voltage regulator: [1], digi-key, EUR 0.76, D2PAK

Inductive Heating Power Transfer

Coils

Indactance calculator, or simpler, this one gives different/wrong? results

• primary coil: length=110mm, diameter=11mm, N=100 => 9.7 uH
• secondary coil: length=100mm, diameter=10mm, 1mm thick brass:
  • inductance=8.0 uH/100^2=0.80nH (8.0uH is inductance for 10mm diameter coil)
  • resistance: 65e-9 [Ohm m] * 3.14*5e-3 / (1e-3*100e-3) = 20 u Ohm
  • L/R fall-off time: 0.8e-9/20e-6 = 40 us.
  • resistance 'seen' on primary coil: 20e-6*100**2 = 0.2 Ohm.

Misc

• FT234XD-T, usb<->rs232 etc converter, 2 EUR, heeft geen cristal nodig (?)
• Layouts: Solderrm-d